Your present location:Home >> Industry news >> 2016 years of bio-plastics industry good policy inventory

2016 years of bio-plastics industry good policy inventory

Date:2017-01-06 15:28

2016 years is nearing the end, look through this year, the bio-plastics industry to a solid development, whether from the perspective of environmental protection or from the perspective of industry development, countries have introduced a series of policies related to the role of play a role can not be overlooked, then In the year, have introduced the biology and plastics industry with the relevant policies?

First, the new national standard children's toys to implement the traditional plasticizer market shrinking
January 1, China's new national standard children's toys officially implemented, the traditional plasticizer market share continues to shrink. AQSIQ, the National Standards Committee approved the release of four new articles on children's toys GB6675-2014 "toy safety" national standards. The new standard for the protection of children is more comprehensive, which increased the six kinds of plasticizers, sound, magnets and magnetic components, the requirements of the burning and broaden the scope of control of harmful substances. The six kinds of plasticizer limit value shall not exceed 0.1%. This limit is equivalent to the prevailing EU regulations. Biomass production of children's toys, is really non-toxic harmless.

Second, Obama signed the United States ban plastic beads bill
In January, Mr Obama signed a bill to stop the sale of soap, scrub, and other health care products containing plastic beads by July 1, 2017, and to sell such beauty and beauty by July 1, 2018 product.
At the beginning of January, the House and Senate unanimously adopted the "Microfiber Action" (H.R.1321) by Reps. FankP allone (New Jersey) and Fred Upton (Michigan).
This small piece of plastic is an exfoliating ingredient in personal care products, such as facial cleanser and toothpaste, which can leak through the water treatment system after entering the sewer. Thus, this plastic microbead eventually comes into local water, rivers and large reservoirs, posing a threat to the survival of seabirds, sea turtles and other marine life.

Third, ASTM announced the determination of the new standard for the degradation of packaging
In July, ASTM, the world's largest international standards development agency, announced that its D20 Plastics Committee is preparing a polymer coating and its associated standards for degradable packaging, "Determining Aerobic Biodegradability of Monolayer and Multilayer Coatings Sex test method ", the proposed standard number is WK54915.
"The new standard will be used to determine the degradability of the packaging for the consumer to explain to the consumer that the packaging can be effectively degraded through industrial facilities and that the packaging should be recycled in the areas where they are available," said ASTM Kokoszka, a member of ASTM. Industrial degradation plants, etc. can also be confident that this type of packaging will not have a negative impact on their degradation equipment. "Kokoszka is also vice president of technical services and business development for sustainable fiber solutions.

Fourth, the national standard "general technical conditions for plastic furniture"
In mid-July, by the Guangdong Quality Supervision Institute led the development of national standards GB / T32487-2016 "General technical conditions for plastic furniture," approved by the State Administration of Quality Supervision and the National Standards Committee issued, and on September 1 formally implemented. The development and implementation of the standard will provide quality evaluation standards for plastic furniture, is conducive to standardize the production and maintenance of the legitimate rights and interests of consumers, and promote the healthy development of plastic furniture industry, but also to fill the gaps in the domestic standard plastic furniture.
The main technical requirements include physical and chemical properties of plastic materials, size and its deviation, shape and location tolerance, appearance, physical and chemical properties, mechanical properties, mechanical properties, mechanical properties, mechanical properties, mechanical properties, , Hazardous substances and flame retardant and so on.

V. Light Industry Development Plan (2016-2020) Focus on the development of bio-based plastics
In mid-August, the Ministry of Industry announced the light industry development plan (2016 - 2020), to promote the plastic products industry to functional, lightweight, ecological, miniaturization direction. Speed ​​up the use of technology and fully biodegradable plastic film, water-based polyurethane synthetic leather products such as technology research and development and application. Focus on the development of new energy, biomedicine, information and other fields of new products, multi-functional, high-performance plastic materials and additives. Focus on the development of bio-based plastics.

Sixth, Development and Reform Commission to improve the ultra-thin plastic shopping bags and other disposable consumer goods limit system
In mid-August, the NDRC website issued a message to the "circular development lead plan" (draft) to the public for comments. Including the increase in the production of ultra-thin plastic shopping bags to investigate and deal with efforts to consolidate the "limit plastic" results; increase the production and sales of excessive packaging products behavior investigation and punishment; improve the disposable consumer goods restrictions on the use of the system; , With water, gas staircase prices; firmly shut down unlicensed business, fail to meet environmental standards and safety standards of small businesses, black workshops, continue to crack down on illegal modification, crack down on "foreign garbage" smuggling.

Seven, the EU revised the sixth "contact with food plastic materials and products regulations"
On August 24, the European Commission issued a new regulation (EU) 2016/1416 to make the sixth revision of the Plastics and Materials Regulations (EU) 10/2011 in contact with foodstuffs. The new regulations take effect directly on 14 September and are equipped with plastic materials and products that do not meet the requirements of the new regulations but meet the requirements of (EU) 10/2011 and can be put on the market until 14 September 2017 until Inventory sales finished.

Eight, the State Environmental Protection Department of plastic packaging products for the preparation of new environmental standards
The end of August, the State Environmental Protection Department to carry out the "environmental labeling products, technical requirements of plastic packaging products" (draft) of the national environmental protection standards for the preparation work. The preparation is mainly for the "Environmental Labeling Products Technical Requirements Packaging Products" (HJ / T 209-2005) to be revised. The new standard will make important adjustments to the raw materials, production processes, degradation properties, biochar content, printing, labeling and storage of plastic packaging products.
(1) adjust the standard name and scope of application
The original standard name is defined as "packaging products", and with the plastic packaging in the packaging industry accounted for a quarter of the four materials, and there is a trend of increasing year by year, and the focus of the plastic environmental factors in the use and disposal Stage, the new standard to be named as "plastic packaging products", the scope of the lock in the plastic packaging category.
(2) increased raw material and production process requirements
① do not use thermosetting plastic and foam plastic as raw materials;
② product production process does not apply azo dyes;
③ product production process does not add GB / T 21928-2008 in the requirements of the phthalate plasticizer.
(3) to adjust the product requirements
① degradable plastic class should meet the GB / T20197-2006 degradation performance requirements;
② non-degradable plastics in the biological carbon content should be greater than 20%, and incineration of harmful substances in the exhaust emissions should meet the QB / T4012-2010 5.2.8 requirements;

Nine, environmentalists support the French disposable plastic tableware ban
In early September, the French government voted to pass the ban on disposable plastic cutlery. According to regulations, by 2020, more than half of the disposable plastic tableware raw materials must be based on biological organic materials, rather than the use of petroleum products based on raw materials, by 2025 the proportion will increase to 60%. British "Independent" reported that the ban will enter into force in 2020.

10, "consumer goods standards and quality improvement planning (2016 - 2020)" to carry out new materials, new technology transformation
In early September, the General Office of the State Council issued the "Consumer Goods Standards and Quality Improvement Plan (2016-2020)" to carry out scientific and technological achievements into technical standards pilot, increase the new technology, new technology, new materials, new products and other innovative results of the standard transformation efforts , To strengthen the new consumer goods manufacturing equipment R & D and standard-setting, to promote scientific and technological innovation to upgrade standards.

Eleven, "" thirteen five "control of greenhouse gas emissions program" to optimize the use of fossil fuels
November 4, the State Council issued a "thirteen five" control of greenhouse gas emissions program "by 2020, to optimize the use of fossil fuels, environmental services, carbon emissions and related industries such as carbon sinks access to huge market development opportunities The As we all know, green plastic PHA bio-plastic full life cycle carbon footprint is negative, will be exposed in the field of carbon trading head and feet.

Twelve, "Hebei Province Development of circular economy regulations" ban on the ultra-thin plastic bags
In early December, "Regulations on the Development of Circular Economy in Hebei Province" (hereinafter referred to as "Regulations"), which is the first circular economy in Hebei Province, local laws and regulations. For the white pollution and waste of forest resources and other issues, regulations, catering, accommodation, entertainment, bathing, car washing and other service enterprises, should use energy saving, water saving, materials and environmental protection technology, equipment and facilities to be able to Multiple use of the product to replace the one-time use of the product, to take environmental protection tips and cost concessions and other measures to encourage and guide consumers to reduce the use of disposable products. Commodity wholesale, retail premises operators should sell or provide biodegradable plastic shopping bags. Prohibit the production and sale of ultra-thin disposable plastic bags, prohibit the production, procurement and use does not meet the national standard disposable foam tableware.

Thirteen, "on the accelerated development of China's packaging industry guidance" the development of green packaging materials
December 19, the Ministry of Industry and Information Technology and the Ministry of Commerce jointly issued the "China's packaging industry to speed up the development of the guidance" (hereinafter referred to as the guidance), the guidance is based on "the People's Republic of China National Economic and Social Development Thirteen Five-Year Plan "," Made in China 2025 "(National Development [2015] No. 28) and" Opinions on the Implementation of the Good Commodity Environment of the "Three Products" of Consumer Goods Industry "(State Council [2016] 40 Number) and other documents from the development. Encourage the use of environmentally friendly raw materials and additives to develop customizable environmentally friendly plastic packaging products,
Development of green packaging materials. Accelerate the green, high-performance packaging materials, independent research and development process, research and development of a number of gaps to fill the gaps in the key materials, breakthroughs in green and high-performance packaging materials and industrial bottlenecks. Attention to the packaging materials research and development, preparation and use of the whole process of environmental friendliness, to promote the transformation of green packaging materials, scientific and technological achievements, the implementation of the use of low (no) VOCs content of packaging raw and auxiliary materials, and gradually promote the packaging life cycle non-toxic harmless.

14, "" thirteen five "national strategic emerging industry development plan" to accelerate the pace of innovation and development of bio-industry
The State Council recently issued the "thirteen five" national strategic emerging industry development plan "(hereinafter referred to as" planning "), the" thirteen "during the strategic emerging industries in China development goals, key tasks, policy measures to make a comprehensive deployment The The formation of a new generation of information technology, high-end manufacturing, biological, green low-carbon, digital creativity and other five output value of 10 trillion yuan level of new pillars to accelerate the pace of innovation and development of bio-industry

15, "Low Carbon Economy Blue Book: China's low-carbon economic development report (2016)" the development of low-carbon technology
On December 9, 2016, the Low Carbon Economy Blue Book: China's Low Carbon Economic Development Report (2016), sponsored by the International Association for Economic and Trade and the Nagoya University in Japan, sponsored by the International Low Carbon Economy Institute and the Social Science Literature Publishing House, The conference was held in Beijing. Participants focused on the green development of the "thirteen five" planning, carbon market and low-carbon technology, new energy and low-carbon city and other topics were discussed. Green plastic will be in the use of oil resources, clean production and emission reduction, technological innovation, carbon trading and other aspects of the show, we have reason to believe that green plastic PHA biodegradable plastics will bring more gospel to mankind.

Conclusion
It is not difficult to find that the safety, environmental protection, energy saving can be described as the focus of national concern in 2016, environmental topics has been high attention, bio-plastics companies as to eliminate white pollution is closely related to the enterprise, it is the focus of the world, these are undoubtedly promote the biological The steady progress of the plastics industry, green plastic on the healthy development of the industry plays an indispensable role in promoting.

TypeInfo: Industry news

Keywords for the information:

Contact us

Address: No.6, Xinsheng Road, Huaqiao Economic Development Zone, 

Kunshan City, Jiangsu Province
Tel:+86-512-50353903         
         +86-512-50353915  
 

Phone:18913259328       
Fax:+86-512-55173131
E-mail:sale@biohf.com

Copyright 2004-2017:Suzhou Hanfeng New Material Co., Ltd.  苏ICP备14024893号 by 300.cn